Power Supply Replacement
DGX-2 System DU-09224-001 _v09|27
b). Pull on the handle to remove the PSU from the chassis.
5. Install the new power supply.
a). Insert the new power supply into the chassis and push it all the way in, making sure
that the blue locking mechanism engages.
b). Plug in the power cord and attach the retaining clip.
c). If needed, power on the system.
6. Confirm the installation by
‣
Viewing the PSU status from the BMC dashboard->Sensors page.
‣
Running nvsm show health to confirm the health of the system.
Pack the old power supply and ship it back to NVIDIA Enterprise Support.
To Next Page
Loading...
Need help?
General
