Nvidia DGX-2 SYSTEM Service Manual

DGX-2 System DU-09224-001 _v09|66
Chapter16. Front Console Board
Replacement
16.1. Front Console Board Replacement
Overview
This is a high-level overview of the procedure to replace the front console board on the DGX-2
System.
1. Unpack the new front console board.
2. Shut down the system.
3. Using a Phillips 2 screwdriver, release the captive screws.
4. Pull the front console board out of the system.
5. Insert the new front console board.
6. Tighten the screws.
7. Power on the system
16.2. Replacing the Front Console Board
A front console board malfunction can be determined by either
‣
No display or connectivity occuring after plugging in a keyboard and monitor to the front of
the system, or
‣
The BMC system event log indicating a front temperature sensor failure.
Raise a ticket with NVIDIA Enterprise Services to request a replacement.
When the new board arrives, unpack it and keep the packaging to use for sending back the old
board.

Nvidia DGX-2 SYSTEM Specifications

General

Brand	Nvidia
Model	DGX-2 SYSTEM
Category	Computer Hardware
Language	English