Front Console Board Replacement
DGX-2 System DU-09224-001 _v09|67
CAUTION: Static Sensitive Devices: - Be sure to observe best practices for electrostatic
discharge (ESD) protection. This includes making sure personnel and equipment are
connected to a common ground, such as by wearing a wrist strap connected to the
chassis ground, and placing components on static-free work surfaces.
1. Power down the system.
2. Remove the front console board.
a). Loosen the two captive screws that secure the front console board.
b). Pull the console board out of the system.
To Next Page
Loading...
Need help?
General
