Nvidia DGX-2 SYSTEM Service Manual

I/O Tray Removal and Installation
DGX-2 System DU-09224-001 _v09|75
3. Remove the cables.
4. Remove the I/O tray.
a). Loosen the two green I/O tray screws with a Philips 2 screwdriver and pull the levers
outward to release the tray.
b). Pull the I/O tray out of the system and place it on a solid, flat work surface.
CAUTION: Exercise care when removing the tray as it is long and heavy, and do not
handle the module from the rear connectors.

Nvidia DGX-2 SYSTEM Specifications

General

Brand	Nvidia
Model	DGX-2 SYSTEM
Category	Computer Hardware
Language	English