Turn off all peripheral devices connected to this product.
Turn off the system by pressing the power button to off.
Disconnect the AC power by unplugging all AC power cords from the system or wall
outlet.
Disconnect all cables and telecommunication lines that are connected to the
system.
Retain all screws or other fasteners when removing access cover(s). Upon completion
of accessing inside the product, refasten access cover with original screws or
fasteners.
Do not access the inside of the power supply. There are no serviceable parts in the
power supply.
Return to manufacturer for servicing.
Power down the server and disconnect all power cords before adding or replacing
any non hot-plug component.
When replacing a hot-plug power supply, unplug the power cord to the power
supply being replaced before removing the power supply from the server.
.
To Next Page
Loading...
