Nvidia DGX-2 - 5.6.1 Configuring a BMC Static IP Address Using ipmitool; 5.6.2 Configuring a BMC Static IP Address Using the System BIOS


Note: If you cannot access the DGX-2 System remotely, then connect a display
(1440x900 or lower resolution) and keyboard directly to the DGX-2 System.
$ sudo ipmitool lan print 1
Set the IP address source to static.
$ sudo ipmitool lan set 1 ipsrc static
Set the appropriate address information.
•
$ sudo ipmitool lan set 1 ipaddr 10.31.241.190
•
$ sudo ipmitool lan set 1 netmask 255.255.255.0
•
$ sudo ipmitool lan set 1 defgw ipaddr 10.31.241.1