Nvidia DGX-2 - 12.4.5 Rebooting a VM; 12.5 Connecting to Your Guest GPU VM; 12.5.1 Determining IP Addresses; 12.5.2 Connecting to the Guest GPU VM

sudo nvidia-vm reboot --domain <vm-domain> --mode <shutdown-mode>
acpi agent initctl
signal paravirt
virsh domifaddr <vm-domain> --source agent
Network Configuration
$ virsh domifaddr 1gpu-vm-1g1 --source agent
Name MAC address Protocol Address
-----------------------------------------------------------------------
lo 00:00:00:00:00:00 ipv4 127.0.0.1/8
- - ipv6 ::1/128
enp1s0 52:54:00:1e:23:2b ipv4 10.120.28.219/24
- - ipv6 fe80::5054:ff:fe1e:232b/64
enp2s0 52:54:00:1b:3b:1c ipv4 192.168.254.150/24
- - ipv6 fe80::5054:ff:fe1b:3b1c/64
docker0 02:42:d9:4e:00:b6 ipv4 172.17.0.1/16
In this example, 10.120.28.219/24 refers to the macvtap network, and
192.168.254.150/24 refers to the private network.

virsh console <vm-domain>
