•
Note: After you select the primary network interface, the system attempts to configure
the interface for DHCP and then asks you to enter a hostname for the system. If DHCP
is not available, you will have the option to configure the network manually. If you
need to configure a static IP address on a network interface connected to a DHCP
network, select Cancel at the Network configuration – Please enter the
hostname for the system screen. The system will then present a screen with the
option to configure the network manually.
•
https://usn.ubuntu.com/
a) Run the package manager.
$ sudo apt update
b) Upgrade to the latest version.
$ sudo apt full-upgrade
Note: RAID 1 Rebuild in Progress - When the system is booted after restoring the
image, software RAID begins the process of rebuilding the RAID 1 array - creating a
mirror of (or resynchronizing) the drive containing the software. System performance
may be affected during the RAID 1 rebuild process, which can take an hour to
complete.
During this time, the command “nvsm show health” will report a warning that the RAID
volume is resyncing.
You can check the status of the RAID 1 rebuild process using “sudo mdadm -D
/dev/md0”.
To Next Page
Loading...
