To Next Page

To Previous Page

3. Software Installation

After installing the VGA card in your computer, please turn on your PC, and your

computer will be automatically detected.

Notice :

Auto-Run CD will auto-detect your VGA and TV card devices.

Therefore, it might show more than one device in the first installing

window. Otherwise, Auto-Run CD will skip the first installing

window when it only detects one device. Please select one

installation of the devices that is proper for this product.

3.1 Installing driver on Windows 98SE/ME

Please set the VGA card as ‘Standard PCI Graphics Adapter (VGA)’. When asked

if you want to restart your PC, click ‘

No’. Then you should follow the next step.

1. Insert the Auto-Run CD-ROM driver (wait few seconds). You will see ‘VGA

Installer’ window that will be shown on the screen. If it does not display, please

browse the CD and double click ‘AutoRun.exe’ icon.

2. Click-on ‘Install Driver’ to install the VGA driver.

3. After the installation is complete, the system will ask you whether you want to

restart your computer now. Click ‘Ye s ’ to reboot your system and activate the

program.

3.2 Installing DirectX on Windows

98SE/ME/2000/XP

When the system restart after finishing the VGA driver setup, please install better

DirectX version than that on your system.

1. Double click CD-ROM icon to let it auto-run. The ‘VGA Installer’ will

e shown

again.

2. Click ‘Install DirectX’ and you will see a ‘Installer’ dialog, and click ‘OK’ to

show next page.

3. Click ‘Ye s’ to continue.

4. Click-on ‘ReInstall DirectX’ to install the DirectX program.

5. When it is done, please click ‘OK’ to reboot Windows.

Nvidia GeForce MX Series User Manual

Questions and Answers: