12
3.3 View User's manual
Click ‘User’s Manual’ to view detailed information regarding the various
Drivers/Programs and FAQ located on the CD.
3.4 Installing driver on Windows 2000/XP
Please set the VGA card as ‘Video Controller (VGA Compatible)’. When asked if
you want to restart your PC, click ‘No’. Then you should follow the next step.
1. Insert the Auto-Run CD-ROM driver (wait few seconds). You will see ‘VGA
Installer’ window that will be shown on the screen. If it does not display, please
browse the CD and double click ‘AutoRun.exe’ icon.
2. Click ‘Install Driver’ to install the VGA driver.
3. A.
Windows 2000:
If you see ‘Di
nature Not
Found’ window, please click ‘Yes’.
B.
Windows XP:
If you see ‘Hardware Installation’
window, please click ‘Continue
Anyway’.
4.
When asked if you want to restart your PC, click ‘
OK’ to finish the installation
and reboot your Windows.
.
To Next Page
Loading...
Need help?
General
