Nvidia GeForce4 MX Series User Manual

5
2.2 Installing your VGA adapter
1. Power off your computer, remove its outside cover, and then assert yourself by
touching the power supply of your computer.
Note:
Before installing your new VGA card, you must first set the VGA
option to either Standard VGA or Standard Display VGA.
2. Remove your old graphics card, and install your new VGA card into the AGP
slot.
3. Align and secure the mounting bracket of your new VGA card to your computer
and replace your computer cover.
4. Connect your monitor cable to the DB-15 connector at your new VGA card.
5. Power on your computer.
Turn Off
Turn Off
!!! Caution !!!
Before you turn on your system,
you have to be sure the VGA card
is setup already and all the cables
are connected.
DO NOT connect / disconnect
TV-out cable when your TV or
PC is Power On.
AGP mainboard
PCI slot
AGP Slot
AGP series product
AGP mainboard
PCI slot
PCI series product

Nvidia GeForce4 MX Series Specifications

General

Memory Clock	166-275 MHz
DirectX	7.0
OpenGL	1.2
Pixel Pipelines	2
TMUs Per Pipeline	2
ROPs	2
AGP	4x
Manufacturing Process	150 nm
Maximum Resolution	2048x1536
RAMDAC	350 MHz
Max Memory	64 MB
Architecture	NV17
Memory Type	SDR, DDR
Memory Bus Width	64/128-bit