Inno3D GeForce Graphics Card User Manual
Page 4 of 16
5. Assemble your Inno3D SLI PC (CONT.)
4. Install the NVIDIA SLI connector to connect the two graphics cards (The NVIDIA
SLI connector is not used with some mainstream graphics card models such as the
GeForce 6600 and Geforce 7300 series.)
5. Once the new NVIDIA SLI-certified components have been installed in the system,
they will be recognized by the operating system upon Windows boot-up. A Found
New Hardware message will be displayed
To Next Page
Loading...
