Power Supply Replacement
www.nvidia.com
RTX Blade Server DU-09559-001 _v01|22
2.
Determine whether you need to shut down the system.
‣
If the five remaining PSUs are working and energized, then you do not need to
shut down power to the RTX Blade Server System..
‣
If fewer than five PSUs are working and energized, then you do need to shut
down power to the RTX Blade Server System.
3.
Unplug the power cable from the faulty power supply.
You may need to dislodge the power cord from the retaining clip.
4.
Remove the faulty power supply.
a) Press down on the release latch and at the same time pull the black handle to
release the PSU from the rear connectors..
To Next Page
Loading...
Need help?
General