to transfer fuel directly from your fuel
container to the fuel tank.
8–Electric Starter and Starter Battery
An electric starter is recommended for
starting.
9–Fuel Can Filter
Fit a filter to the outlet tube of your refueling
container to prevent entry of foreign matter
into the fuel tank.
10–Silicone Tubing
This is required for the connection between
the fuel tank and engine.
11–Plug Wrench
Used for tightening glow plugs. The O.S.
long plug wrench is available as an optional
accessory.
1. Install appropriate propeller and tighten
securely.
2. To facilitate electric starting, install an
O.S. solid aluminum alloy spinner-nut for
centering the rubber drive insert of the
starter. Alternatively, a good quality
spinner, enclosing the propeller boss,
may be used, but make sure that it is of
precision-made and sturdy construction
so that the spinner shell cannot loosen
when the starter is used. Close the
throttle.
3. Fill the fuel tank. Do not allow fuel to
overflow into the silencer, otherwise the
engine may become flooded and
difficult to start.
4. Check that the needle valve is closed.
(Do
not overtighten) Now open the
needle
valve counterclockwise to the
starting setting:
• 1-1/2 turns open
STARTING
14
To Next Page
Loading...
