87
Camera Indicator
The camera indicators are made up of four colors: white,
green, yellow and red. Different light colors and flicker
frequencies represent different indications. They can show
the current working status to the users.
Interactive Statuses
White light flashes which means the product is
being initialized.
White light keeps on which means the product
is in work status.
Green light keeps on which means auto
framing is turned on.
Red light flashes which means upgrade failed.
Red light keeps on which means product failure
including zoom failure or AI errors and so on.
During the upgrade, yellow light flashes.
Zoom
OBSBOT Meet supports 2x digital zoom. The default is 1x,
Users can do manual control for zoom settings from 1x to 2x
via OBSBOT MeetCam.
Sleep Mode
Long press the status button for 3 seconds. When the
indicator light is off, it means that the sleep mode is
activated.
⚠ The product cuts off both the video and audio in the
sleep mode.
HDR
Look your best over the video, even in low light and direct
sunlight with HDR. By default, HDR is off. Users can switch it
in the OBSBOT MeetCam software.
Focus
OBSBOT Meet supports two focusing methods.
① Auto focus
Based on OBSBOT’s AI technology, the auto-focus method
intelligently adjusts the lens in real-time so you will always
stay in focus, no matter you move toward or away from the
camera.
② Manual focus
Users can close the auto-focus function and switch to
manual focus method in OBSBOT MeetCam.
To Next Page
Loading...
Need help?
General
