Need help?Do you have a question about the Oce VarioPrint 6180 Titan and is the answer not in the manual?
Explains typography and safety symbols used in the maintenance guide.
Lists available documentation and the main content of user manuals.
Defines key operator role, safety precautions, and maintenance levels.
Describes how the operator panel indicates maintenance and icon meanings.
Procedure for replacing sheet and spiral cleaners, including opening covers.
Steps to unlock the left and right clean units using the service key.
Instructions on lifting the right and left clean units to the upper position.
Step-by-step guide to remove sheet cleaners from the machine.
Procedure for removing spiral cleaners from the machine.
Instructions on how to recondition used sheet cleaners.
Steps to install new spiral cleaners correctly.
Procedure for installing new sheet cleaners.
Instructions on lowering the clean units into their locked position.
Steps to lock the left and right clean units using the service key.
Procedure for closing the various inner and top covers after maintenance.
Steps to clean the frame unit using specific tools and materials.
Final steps to complete the maintenance, including closing doors and confirmation.
Procedure to lock the left clean unit after maintenance.
Procedure to lock the right clean unit after maintenance.
Procedure to remove sheets stuck in interface and process modules.
Steps to open the machine's front doors for access.
Instructions for removing sheets located at the top cover of the machine.
Procedure to access and remove sheets from the machine's inner covers.
Steps to remove sheets from the registration unit.
Procedure for safely removing the preheat unit from the machine.
Instructions for disassembling and reassembling the preheat unit.
Procedure to correctly install the preheat unit back into the machine.
Steps to unlock clean units as part of Level 2 maintenance.
Instructions for lifting clean units during Level 2 maintenance.
Steps to lower clean units into their locked position.
Procedure to lock clean units after Level 2 maintenance.
Steps to close the machine covers after Level 2 maintenance tasks.
Procedure for cleaning the left OPC belt when pollution is detected.
Steps to unlock the left OPC unit using the service key.
Procedure to lock the left OPC unit after cleaning.
Procedure for cleaning the right OPC belt when pollution is detected.
Steps to unlock the right OPC unit using the service key.
Procedure to lock the right OPC unit after cleaning.
Procedure for cleaning glue cleaning rollers, including required cleaners.
Steps to unlock clean units for glue cleaning roller maintenance.
Instructions for lifting clean units for glue cleaning roller maintenance.
Procedure to lift the TTF (Through-The-Fuser) units for access.
Steps to prepare the machine for cleaning glue cleaning rollers.
Procedure to close the TTF units after maintenance.
Instructions for lowering clean units after glue cleaning roller maintenance.
Procedure to lock clean units after glue cleaning roller maintenance.
Steps to close the machine covers after glue cleaning roller maintenance.
Final steps to complete Level 2 maintenance tasks.
Procedure to check the status of air filters for the light-weight media module.
Steps to replace all four air filters in the filter unit.
Procedure to remove the air guidance unit to access the TTF.
Procedure to reinstall the air guidance unit after maintenance.
To Next Page
General