What to do if there is a media jam in the fuser section of my Oce PlotWave 900 Printer?
If you encounter a media jam in the fuser section of your Oce Printer, and you cannot open the transport unit, you have to cut the paper and remove it. If the paper continues to come out, ensure it is cut manually. If the fuser section covers continue flashing on the display, double-check the fuser section for any remaining obstructions.
What should I do if original jam occurs often on my Oce PlotWave 900?
If original jams occur frequently on your Oce Printer, verify that you are using the correct type of original. Also, check that you are inserting the original along the guide. Finally, ensure the original is not damaged before inserting it into the printer.
What to do if there is a media jam in the paper roll compartment of my Oce PlotWave 900 Printer?
If you find a media jam in the paper roll compartment of your Oce Printer, remove any jammed paper behind the chip tray, underneath the plate, underneath the roll 2, the roll 4 or the roll 6 feed plate.
Media Handling| tray capacity | 2 x 750 sheets - 20lb Bond |
|---|---|
| media width | 8.5” x 36” |
| media length | 8.5” x 48” |
| media weight | 16 - 29 lb Bond |
Sound Levels| sound level standby | ≤ 35 dB (A) |
|---|---|
| sound level active | ≤ 71 dB (A) |
Electrical| voltage | 100 – 240 V |
|---|---|
| frequency | 50 – 60 Hz |
Weight and Dimensions| required floor space | 59.1” (W) x 63.0” (D) x 43.3” (H) |
|---|---|
| weight | 309 lbs. |
Electrical| voltage | 100 – 240 V |
|---|---|
| frequency | 50 – 60 Hz |
Provides essential notes, definitions, and attention-getters for manual usage.
Guides users on accessing Océ's online support, downloads, and contact information.
Introduces the Océ PlotWave 900 system, its components, and optional modules.
Details system operation, user interaction methods, power management, and workspace requirements.
Describes the printer, scanner, and controller components of the Océ PlotWave 900 system.
Explains the keys and display of the printer operator panel for system control.
Covers common actions, display information, attention lights, and online/offline buttons.
Details setting media types, materials, and sizes, and managing print jobs.
Introduces Océ Express WebTools, access methods, and outlines system/browser requirements.
Guides on configuring network settings, secure protocols (IPSec, IPv6), and E-shredding.
Covers job management, system status, media, and toner level indications.
Details user roles, authorizations, login procedures, and password management.
Guides on configuring regional settings, sleep timers, scan destinations, and system preferences.
Explains scanner accounting and logging settings for job tracking.
Explains job states in Smart Inbox and Queue for monitoring print jobs.
Details what to know before sending jobs, including driver usage and media selection.
Guides on using Océ Publisher Express to submit print jobs with various file formats.
Covers using Océ Windows and PostScript drivers for sending print jobs.
Explains how to send print jobs using FTP and LPR protocols.
Describes how to print jobs directly from the Smart Inbox using Océ Express WebTools.
Explains the keys, display, and sections of the Océ PlotWave 900 scanner operator panel.
Guides on setting panel language, start screens, and job templates for the scanner.
Details custom sections, original settings, print settings, and file settings for scanning.
Covers essential copy tasks like making copies, selecting media, input modes, and zoom factors.
Explains how to adjust brightness, background compensation, and select original types.
Guides on scanning with filing strips and adjusting image alignment for copies.
Explains the keys, display, and sections of the Océ TDS600 scanner operator panel.
Guides on setting panel language, start screens, and job templates for the TDS600.
Covers essential copy tasks like making copies, selecting media, input modes, and exposure.
Explains zoom factors, exposure levels, background compensation, and image alignment.
Guides on handling filing strips and performing mirror imaging for copies.
Introduces Océ Mobile WebTools functionalities and required setup for mobile devices.
Guides on connecting mobile devices using QR codes, URLs, or IP addresses.
Details how to select and print files from a mobile device using Océ Mobile WebTools.
Explains how to scan documents and save them to a mobile device via Océ Mobile WebTools.
Covers handling non-standard size originals for both Océ PlotWave 900 and TDS600 scanners.
Details how to define scan width and copy size for non-standard originals.
Guides on scanning with filing strips and adjusting image alignment for copies.
Explains how to adjust brightness and use automatic background compensation.
Guides on selecting the appropriate original type for optimal scanning results.
Details how to perform scan-to-file jobs with or without templates.
Explains how to use pre-defined templates for efficient copying.
Covers folder introduction, folded copy delivery, folding legends, and drawing methods.
Details settings for folded package width, length, binding strip, and reinforcement.
Guides on applying folding settings via the scanner operator panel.
Explains the reinforcement unit, its function, and how to enable reinforcement.
Details belt unit operations, selecting belt delivery, and adjusting side guides.
Explains the belt full detection system and operator alerts.
Introduces the Océ Double Decker Pro as an optional finishing module and its functions.
Identifies and describes the components of the Océ Double Decker (Pro) model.
Provides stack capacity specifications for different media types.
Guides on defining tray selection settings via Océ Express WebTools.
Explains how to define separation settings for media in Océ Express WebTools.
Details procedures for removing and loading media rolls, including using the roll loader.
Explains how to clear the paper chips from the chip tray when it becomes full.
Provides instructions on how to add toner to the printer when it is empty.
Guides on cleaning the Océ PlotWave 900 and TDS600 scanner components.
Covers maintenance for the reinforcement unit, including tape rolls and waste boxes.
Details the process of cleaning the reinforcement unit knives for optimal performance.
Explains how to empty the waste basket of the punch unit.
Introduces common problems like jams and how the system provides guidance.
Guides on how to detect print job problems using Océ Express WebTools error reports.
Provides troubleshooting steps for various event messages encountered in Océ Express WebTools.
Explains how to enable or disable error report functions in Océ Express WebTools.
Provides step-by-step instructions for clearing original jams on both Océ PlotWave 900 and TDS600 scanners.
Details procedures for clearing media jams in paper roll compartments, transport units, and folders.
Explains how to clear tape jams occurring in the reinforcement unit.
Provides solutions for cases where no reinforcement strips appear on the output without an error.
Advises contacting Océ service for unresolvable problems and system shutdown.
Explains how the system indicates when servicing is required and where to find contact information.
Guides on configuring proxy settings, checking connections, and enabling remote login for online services.
Details the process of updating system software and checking the status of applied patches.
Explains the need for license activation for Océ applications and options.
Outlines the possibilities available in the 'Licenses' tab for managing active licenses.
Describes the step-by-step workflow for obtaining and activating new licenses.
Explains the structure of license files and what is displayed based on license types.
Guides on viewing active licenses, their details, and saving license information.
Details the process of getting a new license file and uploading it to activate functions.
Introduces Océ Account Center for managing account information of print, copy, and scan jobs.
Explains the purpose and functions of the Océ Account Console application for administrators.
Describes the main functional areas of Océ Account Console: Dialog, Devices, Export Filters, Licenses.
Guides on defining 'Logging and accounting' settings to enable account management for jobs.
Introduces Océ Repro Desk Studio, its purpose, and key product features for end-users.
Guides on checking and adapting network settings via Océ Express WebTools or the printer operator panel.
Provides detailed technical specifications for the Océ PlotWave 900 printer.
Details technical specifications for the Océ PlotWave 900 scanner.
Provides technical specifications for the Océ TDS600 scanner.
Outlines hardware and software specifications for the Océ PlotWave 900 controller.
Lists specifications for optional folder, reinforcement, and belt units.
Provides specifications for the optional Océ Delivery Tray.
Lists specifications for the optional Océ Double Decker Pro stacker.
Provides specifications for the optional Océ Delivery belt unit.
Lists preferred Océ media types and sizes for optimal print quality.
Explains scale factors for copying images between different media sizes.
Directs users to Océ's website for product support, downloads, and supplies.
Provides a questionnaire for user feedback on the manual's accuracy and usability.
To Next Page
