Oce PlotWave 900 - Online Services Configuration

'Online services'
Introduction
The Océ Express WebTools offer online services (from the Océ PlotWave 900 or from
Océ to the Océ PlotWave 900).
You can find these settings in the 'Support' - 'Online Services' tab.
This tab is only available in case the 'Online Services' license is active. See ‘Check your li-
censes’ on page 342
'Online Services' has the following options:
•
'Configure proxy': Configure a secure Internet connection via a proxy server between
the Océ PlotWave 900 and Océ.
•
'Check connection': Check the connection between the Océ PlotWave 900 and Océ.
•
'Allow remote login': Allow a remote login from Océ to the Océ PlotWave 900.
•
'Download log files': Download the online services log files from the Océ PlotWave
900.
Note:
Log on as a system administrator to set up a (secure Internet) connection.
'Configure proxy' (applicable if proxy settings are required)
1.
Set up the 'Proxy server':
'Automatic proxy detection'
•
•
'Proxy enabled'
•
'Proxy hostname'
•
'Proxy port'
2.
Set up authentication:
•
'Proxy requires authentication'
•
'Proxy authentication: user'
•
'Proxy authentication: password'
•
'Proxy authentication: domain'
3.
Click 'Ok' to finalize proxy configuration.
'Check connection'
1.
After 'Configure proxy' setup (if applicable), it is possible to test the connection.
Click on 'Check connection' to test the connection between the Océ PlotWave 900 and
Océ.
Chapter 13 - Support 331
'Online services'