Oce PlotWave 900 - Ipv6 Settings

IPv6 settings
Introduction
In case IPv6 is enabled, the user can change some of the IPv6 settings.
IPv6 settings
The following settings for IPv6 are available:
•
'IPv6 Link Local address'. This address is determined automatically. The user cannot
change this address.
•
'IPv6 Stateless (SLAAC) address'. This address is determined automatically. The user
cannot change this address.
•
'IPv6 manual address'. The IPv6 address when set manually. Enter the value '::' or
'12:00 AM:12:00 AM:12:00 AM:12:00 AM' to disable a manual IPv6 address.
•
'IPv6 manual gateway address'. The IPv6 manual gateway address when set manually.
Enter the value '::' or '12:00 AM:12:00 AM:12:00 AM:12:00 AM' to disable a man-
ual gateway
Chapter 3 - Define your workflow with Océ Express WebTools80
IPv6 settings