Oce PlotWave 900 - Clearing Original Jams

Troubleshooting
How to clear an original jam (Océ PlotWave 900scanner)
Introduction
When you scan and an original jams, the message ‘Original jam’ appears on the scanner
display.
You must remove the original from the scanner.
Remove a jammed original
1.
Press the handle under the original feed table to open the top cover of the scanner.
[213] Open the top cover of the scanner
2.
Remove the original.
Chapter 12 - Solve problems 299
How to clear an original jam (Océ PlotWave 900scanner)