Oce PlotWave 900 - Océ TDS600 Scanner; Non-Standard Size Originals (Océ TDS600 Scanner)

Océ TDS600 scanner
Non-standard size originals (Océ TDS600 scanner)
The Océ TDS600 scanner automatically detects the width of the inserted original. For
DIN sizes, for example, it detects whether the width is A0, A1, A2, A3, A4, 500 mm, or
700 mm.
The Océ TDS600 scanner system uses a memory table that contains all standard width
- standard length combinations to predict the length of the original. The scanner also
measures the real length of each original while it is transferred through the scanner.
Note:
When you scan thick, thin or damaged originals or originals in a carrier sheet, use of
output at the rear side of the scanner is recommended to ensure correct delivery.
Chapter 8 - Special copy and scan jobs226
Non-standard size originals (Océ TDS600 scanner)