Define the default output quality for copy and scan-to-file
jobs
Introduction
The Océ Express WebTools offers settings to optimize the default output quality for copy
and scan-to-file jobs. You can define a default output quality for each template.
You can find these settings in the 'Preferences' - 'Template 1', 'Template 2', 'Template
3' or 'Template 4' tabs.
Note:
Before you can edit a setting or a settings group, you must be logged on as a key operator
or power user.
'Original type'
The quality of the printed output is optimized based on the type of the original that is
copied.
Setting location: 'Template 1, 2, 3 or 4: Original - Image'.
#
DescriptionValues
'Line/text' is default value.
This value is advised for line drawings and design drawings.
Lines and text are optimized, a light background is compensated.
'Line/text'
“Grays/Lines” is the recommended value for originals that
contain many grayscales and lines.
'Grays/Lines'
'Dark original' is the advised value for originals with a dark
background.
The output is optimized especially for dark transparent originals.
The system compensates for the dark background and the actual
information on the original is optimized.
'Dark original'
'Blueprint' is the advised value for blueprints.
The information on the original is inverted. White lines will be
black, the blue background will be white.
'Blueprint'
'Printed matter' is the advised value for an original that is already
a print itself, containing raster information.
'Printed matter'
'Cut/Paste' is the advised value for an original that contains
paste edges.
'Cut/Paste'
Chapter 3 - Define your workflow with Océ Express WebTools 115
Define the default output quality for copy and scan-to-file jobs
To Next Page
Loading...
