Automatic background compensation
Introduction
The automatic background compensation will provide a good quality copy from a large
variety of originals. The automatic background compensation setting, which is switched
on (by default), ensures the production of background-free copies of most line drawings.
[157] Background compensation setting
Set the automatic background compensation
1.
Open the “Image” card in the “Original” section.
2.
Press the “Background compensation” function key if this function is disabled.
Note:
When copying extremely light or dark originals, or originals with unequal background
density, the results may not meet your requirements (e.g. too much background). In
such cases, you can manually adjust the brightness.
Chapter 8 - Special copy and scan jobs 233
Automatic background compensation
To Next Page
Loading...
