Oce PlotWave 900 User Manual

Templates start screen
Select the ‘Templates’ start screen in the following situations.
•
if the scanner is often used by experienced users
•
if you must perform many scan and copy jobs with similar settings.
In the ‘Templates’ start screen, first select a template and then start the original transport
with the green start key. To display the ‘Templates’ section immediately, press ‘Job defi-
nition’.
[112] Operator panel view with ‘Templates’ start screen on the Océ TDS600 scanner
Chapter 6 - Use the Océ TDS600 scanner to copy 175
Templates start screen

Oce PlotWave 900 Specifications