Oce PlotWave 900 User Manual

The Océ PlotWave 900 system
Introduction
The Océ PlotWave 900 is available as a digital network printer or as a hybrid system with
a scanner to print, copy, or scan to file.
This in combination with your network: Océ Express WebTools, Océ Publisher Express,
Océ Repro Desk® and one or more drivers (Windows® driver or PostScript®) allow
you to use the Océ PlotWave 900 as your default enterprise print and copy solution.
See the Connectivity Manual for more details on network settings for the Océ PlotWave
900 printer.
More information about installing, configuring and using drivers can be found in the
documentation provided with the drivers.
Note:
All drivers for the Océ PlotWave 900 can be freely downloaded from www.oce.com.
The Océ PlotWave 900 printer and options
The Océ PlotWave 900 printer has the ability to hold 4 or 6 rolls of media.
In standard configuration the printer delivers your jobs on the integrated receiving tray.
The Océ PlotWave 900 printer has the following options:
•
4 or 6 paper rolls
•
printing speed of 8 or 10 A0/min
•
a controller with monitor to submit, edit, and control jobs
•
a folder to fold the output
•
a reinforcement unit to add a reinforcement strip to folded output
•
a punch unit to make holes on one edge of the folded output
•
a belt unit to deliver folded output nicely stacked for a longer period of time (useful
for unattended printing)
The belt unit can have 1 or 2 extended belts (capacity of 170 A0 each)
•
an Océ Delivery Tray
•
an Océ Double Decker Pro two-bin stacker for high capacity unfolded output
Océ PlotWave 900 scanner
You use the Océ PlotWave 900 scanner to copy or to scan to file.
The optional Océ Delivery Tray enables you to stack originals behind the scanner.
Chapter 2 - Get to know the Océ PlotWave 900 system30
The Océ PlotWave 900 system

Oce PlotWave 900 Specifications