Oce PlotWave 900 User Manual

Folder
Introduction
The Océ PlotWave 900 can have a folder to fold your output. The output is folded ac-
cording to the selected folding width and length with the drawing method.
Note:
You can only fold paper. Polyester, transparent or vellum media cannot be folded. If
you try to fold polyester, transparent or vellum media, a media jam will occur.
Standard folding settings
By default, you use the standard folding settings defined for your Océ PlotWave 900
system by the key operator. The following settings are available:
Set the folded copy delivery
1.
Press the “Finishing” card in the “Print” section.
2.
Press the function key ‘Folded copy delivery’.
3.
Select “Stacker” or “Belt”.
Set folding legend
1.
Press the “Feeding” card in the “Original” section.
2.
Press the function key “Legend location”.
3.
Select “Leading” or “Trailing”.
Note:
In the drivers, this setting is called the ‘Folding orientation’, with the options ‘Portrait’,
‘Landscape’ and ‘Automatic’.
Set the drawing method
1.
Press the “Feeding” card in the “Original” section.
2.
Press the function key “Drawing method”.
3.
Select “Standard”, “Ericsson” or “Afnor”.
Chapter 9 - The Folder, Reinforcement unit and Belt unit 243
Folder

Oce PlotWave 900 Specifications