Oce PlotWave 900 - Clean the Océ TDS600 Scanner

Clean the Océ TDS600 scanner
When to do
The copy and scan quality can decrease if the reference roller or glass plate is dirty.
In such cases, you must clean the scanner to ensure top quality output.
Caution:
When you clean the reference roller, be careful not to damage the sensors on the scanner.
How to clean the reference roller and glass plate
1.
Turn off the scanner.
2.
Open the top cover of the scanner.
[189] Open the top cover of the scanner
Chapter 11 - System maintenance 275
Clean the Océ TDS600 scanner