How to clear a media jam in the fuser section
Remove a media jam in the manual feed
Warning:
When you remove the paper in the fuser section, always wear the heat-resistant gloves.
The heat-resistant gloves are in the left-hand cover of the paper output unit.
1.
If you have a Océ Delivery Tray, remove the Océ Delivery Tray from the back of the
printer.
[224] The Océ Delivery Tray
2.
If you have a short belt unit, put the belt in an upright position. .
[225] Put the belt in an upright position
Chapter 12 - Solve problems 309
How to clear a media jam in the fuser section
To Next Page
Loading...
