Oce PlotWave 300 - User Manual

-
o
Océ
Océ PlotWave™
300
Join the next wave
User manual
Operating
information

Oce PlotWave 300 Specifications

General

Brand	Oce
Model	PlotWave 300
Category	Printer
Language	English

Summary

Chapter 3 Quick start

Connect the Mains Supply Cable and the Network Cable

Step-by-step instructions for connecting the printer's power and network cables.

Load a Media Roll (Position 1)

Detailed procedure for loading a media roll into the first position of the printer.

Load a Media Roll (Position 2)

Detailed procedure for loading a media roll into the second position of the printer.

Chapter 5 Use the printing system

Pause, Resume or Stop an Active Job

Instructions on managing active print or scan jobs by pausing, resuming, or stopping them.

Feed the Original

Do a Basic Copy Job

Do a Basic Scan Job

Chapter 6 Maintain the printing system

Switch Off the Printing System

Steps to safely power down the printing system.

Move and Re-adjust the Printing System

Refill the Toner

Step-by-step guide on how to refill the toner cartridge when indicated.

Clean the Scanner

Chapter 7 Solve problems

How to Solve Problems with Jobs

Guidance on troubleshooting common issues related to print and scan jobs.

Clear a Media Jam in the Fuser Section

Detailed steps to remove media jams from the fuser section of the printer.

Clear a Media Jam in the Media Bypass Section

Detailed steps to remove media jams from the media bypass area.

Clear a Media Jam in the Roll Feed Section

Detailed steps to remove media jams from the roll feed section.

Chapter 8 License management

Save the Currently Active Licenses

Install a New License