Oce PlotWave 300 - Refill the Toner

Refill the toner
Refill the toner
Introduction
If the ‘Refill toner’ message appears on the user panel, you must refill the toner immedi-
ately. Use only 1 bottle of Océ PlotWave 300 toner each time the Océ PlotWave 300
indicates the toner must be refilled.
Note:
Every second time you have refilled the toner, you must also replace the residual toner
container. (see ‘Replace the residual toner container’ on page 264).
Note:
You can leave the printer turned on when you refill the toner.
How to refill the toner
1.
Open the toner compartment.
2.
Shake the toner bottle thoroughly. Leave the bottle closed.
Chapter 6 - Maintain the printing system262
Refill the toner