Oce PlotWave 300 User Manual

Do an extended scan job
1.
Feed the original face up and centered on the original feeding table.
Note:
You do not need to center the original precisely. The exact position of the original is au-
tomatically detected by the scanner.
2.
Select 'Scan' on the user panel.
3.
Open the 'Scan' tab with the confirmation button above the scroll wheel.
4.
Select your scan template.
Chapter 5 - Use the printing system216
Do an extended scan job

Oce PlotWave 300 Specifications

General

Brand	Oce
Model	PlotWave 300
Category	Printer
Language	English