Send print jobs
What you need to know before you send your print jobs
Definition
Before you send print jobs to the Océ PlotWave 300, remember the following.
■
The values defined in the Océ Express WebTools are default values for the general
system behavior. You can define a number of job settings in the Océ printer drivers
or the Océ job submission tools. The settings defined in the printer drivers or the job
submission tools always overrule the settings defined in the Océ Express WebTools.
■
Make sure that you define and load the correct media for your job.
■
Make sure that you define the correct job settings. For example, orientation, rotation,
and media type.
Chapter 5 - Use the printing system154
What you need to know before you send your print jobs
To Next Page
Loading...
Need help?
General