Oce PlotWave 300 User Manual

Print a test print
When to do
Print a test print from roll 1 or from roll 2 at the request of the Océ Helpdesk. The test
print can provide information to solve quality problems.
How to print a test print
1.
From the 'HOME' screen on the user panel select the 'System' tab.
2.
Select the 'Setup' tab.
3.
Use the scroll wheel to select 'Test prints' and confirm with the confirmation button
(above the scroll wheel).
4.
Use the scroll wheel to select 'Test print from roll 1' or 'Test print from roll 2'.
5.
Use the lower right soft key or press the green button to start printing.
6.
Select 'Home' to return to the 'HOME' screen.
Chapter 7 - Solve problems282
Print a test print

Oce PlotWave 300 Specifications

General

Brand	Oce
Model	PlotWave 300
Category	Printer
Language	English