Oce PlotWave 900 - Non-standard Originals Handling

Océ PlotWave 900 scanner
Non-standard size originals (Océ PlotWave 900 scanner)
The Océ PlotWave 900 scanner automatically detects the width of the inserted original.
For DIN sizes, for example, it detects whether the width is A0, A1, A2, A3, A4, 500 mm,
or 700 mm. The Océ PlotWave 900 scanner system uses a memory table that contains
all standard width - standard length combinations to predict the length of the original.
The scanner also measures the real length of each original while it is transferred through
the scanner.
Note:
When you scan thick, thin or damaged originals or originals in a carrier sheet, use of
output at the rear side of the scanner is recommended to ensure correct delivery.
Chapter 8 - Special copy and scan jobs212
Non-standard size originals (Océ PlotWave 900 scanner)