Oce PlotWave 900 User Manual

Reinforcement unit
Introduction
If you install a reinforcement unit, output can be delivered with a pre-punched, self-ad-
hesive strip.
[170] Example a of reinforcement strip
With this strip the output can be stored in a binder, without running the risk that the
punching holes tear out. You can unfold a folded map in a binder without opening the
binder mechanism.
[171] Example of a folded map with a reinforcement strip
The optional reinforcement unit supports all media sizes larger than A4. However, A4
size media can also be reinforced if you enable A4 reinforcement in the Océ Express
WebTools.
Chapter 9 - The Folder, Reinforcement unit and Belt unit 249
Reinforcement unit

Oce PlotWave 900 Specifications