Note:
Reinforcement is only possible with the Standard folding method.
See ‘Insert a new tape roll’ on page 278 for more information about inserting a new tape
roll.
Enable reinforcement
1.
Click on the ‘Jobs’ key in the Océ Express WebTools.
2.
Select the ‘Copy’ tab if you want to enable folding reinforcement for copy jobs or select
the ‘Print’ tab if you want to enable folding reinforcement for print jobs.
3.
Open the ‘Defaults’ folder.
4.
Open the ‘Finishing’ folder.
5.
Select the ‘Folding reinforcement’ option.
6.
Enable folding reinforcement in the right part of the window.
7.
Click on the ‘Apply’ key to save any changes you have made.
Chapter 9 - The Folder, Reinforcement unit and Belt unit250
Reinforcement unit
To Next Page
Loading...
