Ocean Insight FLAME - Installation and Setup; Software Installation

To Next Page

To Previous Page

MNL-1012 Rev A

Installation and Setup

Software Installation

Use OceanView version 1.5 and above for Flame. You can use OceanView on the following operating systems:

Windows

Apple

Linux

8.1

OS X Version 10.5 or later on

Intel processor

Any version released for an x86

or amd64 platform since 2010

*Software may run with previous operating systems but Ocean Insight does not actively support these installations.

Consult the OceanView manual for hardware requirements when using OceanView.

NOTE

Be sure to install the spectroscopy application BEFORE connecting the spectrometer to your PC. The software installs the

drivers required for spectrometer installation. If you do not install the software first, the system will not properly recognize the

spectrometer. If you have already installed the Flame to a computer running on a Windows platform prior to installing the

operating software, consult the Troubleshooting section for information on correcting a corrupt Flame installation.

NOTE

Be sure that you download the correct software package for your computer version (32 or 64-bit). See the Frequently Asked

Questions in Troubleshooting for more information on determining your computer version.