About This Manual
Document Purpose and Intended Audience
This document provides the users of USB4000 Spectrometers with instructions for setting up, calibrating
and performing experiments with their spectrometer.
What’s New in This Document
This version of the USB4000 Fiber Optic Spectrometer Installation and Operation Manual adds the
USB-ADP-BB adapter for the Breakout Box.
Document Summary
Chapter Description
Chapter 1: Introduction
Contains descriptive information about the USB4000
Spectrometer and how sampling works. It also provides a list
of system requirements, interface options, and shipment
components.
Chapter 2: Installing the USB4000
Provides installation instructions.
Chapter 3: Troubleshooting
Contains recommended steps to isolate and correct common
problems.
Appendix A: Calibrating the
Wavelength of the USB4000
Provides instructions for calibrating the USB4000
Spectrometer.
Appendix B: External Triggering
Contains information about external triggering for the
USB4000.
Appendix C: Specifications
Contains technical specifications and connector pinouts for the
USB4000 Spectrometer.
Product-Related Documentation
You can access documentation for Ocean Optics products by visiting our website at
http://www.oceanoptics.com. Select Technical → Operating Instructions, then choose the appropriate
document from the available drop-down lists. Or, use the Search by Model Number field at the bottom
of the web page.
• Detailed instructions for SpectraSuite Spectrometer Operating Software are located at:
http://www.oceanoptics.com/technical/SpectraSuite.pdf.
211-00000-000-02-0908 iii
To Next Page
Loading...
