6
OTS POWERCOM
RUBBER ARMORED BASE
The Rubber Armored Battery Base protects the unit from impact and
reduces abrasion damage as well as sliding on smooth surfaces.
SEALING SCREWS
The Sealing Screws are captive to the Rubber Armored Base. The Sealing
Screws remain connected to the Rubber Armored Base even when fully
disengaged from the Main Housing. Each screw contains an O-ring to seal
the Rubber Armored Base to the Main Housing. To prevent possible water
intrusion into the unit, ensure the Sealing Screws are tightened properly
before beginning the dive.
EARPHONE/MICROPHONE ASSEMBLIES
Earphone/Microphone Assemblies are available for most popular full face
Part Number Description
910496-000 OTS Guardian FFM, Hot Mic, Dual Earphone, PTT Control, HiUse
910379-000 OTS Guardian FFM, Super Mic, Dual Earphone, PTT Control,
HiUse
910369-006 OTS Guardian FFM, Hot Mic, Dual Earphone, HiUse, Strain Relief
(No PTT - Hardwire only)
910369-002 OTS Guardian FFM, Hot Mic, Dual Earphone, PTT Control, Male
Marsh Marine Connector
910497-000 Interspiro AGA FFM, Hot Mic, Dual Earphone, PTT Control, HiUse
911060-098 Interspiro AGA FFM, Super Mic, Dual Earphone, PTT Control,
HiUse
911060-044 Interspiro AGA FFM, Super Mic, Dual Earphone, PTT Control,
Marsh Marine Connector
911060-146 Kirby Morgan M-48, Hot Mic, Dual Earphones, PTT Control, HiUse
911060-148 Kirby Morgan M-48, Super Mic, Dual Earphones, PTT Control,
HiUse
911060-105 Draeger Panorama FFM, Super Mic, Dual Earphones, PTT Con-
trol, HiUse
Note that the OTS Guardian and Spectrum Full Face Masks use the same
Earphone/Microphone Assembly.
To Next Page
Loading...
