11
OTS POWERCOM
want to turn the Squelch on and set it to the high setting. Note that
when set to the high setting, you may be limiting the signal from a
limiting the range. If the water is particularly quiet or you need to
hear a potentially weak signal from a distant diver/surface station,
TRANSMIT
Under the transmit options menu, you can choose between
manual Push-To-Talk (PTT) transmission or automatic Voice
will only transmit for as long as you hold down the PTT button. In
mode will require the sensitivity to be set per individual for best
unit will prompt you for either “High” sensitivity or “Low” sensitivity.
how the system works will help in using this feature. The system
and closes the transmission. If the sensitivity is too high, false
triggering can be an issue. If the sensitivity is too low, it can cause
the unit to not trigger easily or cease transmission too soon.
” away from your lips.
you are either transmitting or receiving, not both at the same time.
you cannot hear other divers or the surface.
SCRAMBLER
once when “Scrambler” is heard. Your next choice will be “On” or
enables the divers to have more secure communication while the
option is on. Divers with this feature will be able to hear normal
speech, while divers without will hear unintelligible transmissions,
providing an additional layer of secure voice communications.
To Next Page
Loading...
