15
OTS POWERCOM
MAINTENANCE INTERVALS
Follow the maintenance cycle outlined in the following page for
Manufacturer Recommended Maintenance Schedule
Part Cycle
Battery 2 years or 300 Charge cycles
Sealing Screw O-rings 2 years
Battery Base and Housing O-rings 2 years
Cable As Required
Transducer As Required
any damage or nicks. Clean and lubricate the O-rings with a non-silicone
lubricant (like Krytox 204 or Tribolube 71) before closing the unit back up. If
the O-rings are damaged, replace them before diving the PowerCom.
To Next Page
Loading...
