26
Accessing Other Modes
While in the Surface Mode you can access various other Modes
that are described in detail throughout this manual.
• Press the Front (Advance) button to access a sequence that
includes Plan, Fly, DeSaturation, and Log Modes.
• Press the Side (Select) button to activate the Backlight.
• Press Both buttons (simultaneously) to access Set and Simula-
tor Modes.
SET MODES
Settings are divided into 2 categories. Set Mode #1 includes
several settings that you would change more often and Set Mode
#2 includes those items not likely to change once you set them.
Set Mode 2 can be accessed by first entering settings in Set
Mode 1, or by bypassing Set Mode 1. Sequence is at the left.
Settings can be made one after the other, or you can access a
specific item that you want to set, bypassing others. Set points
can be advanced by scrolling (press/hold) or one increment at a
time (press/release less than 2 seconds).
To return to the Surface Mode at any time, simultaneously press
and hold Both buttons for 2 seconds.
SET MODE #1
FO2 (for a Nitrox dive)
Max Depth alarm
Elapsed Dive Time alarm
PC (for download)
SET MODE #2
Units of Measure
Hour Format
Hour
Minute
Year
Month
Day
Audible alarm
Max TLBG alarm
ATRBG alarm
Turn Pressure alarm
End Pressure alarm
Dive Time Remaining alarm
Max PO2 alarm
FO2 Default
Backlight Duration
Sampling Rate
Gauge Mode
Water Activation
Link Code
To Next Page
Loading...
