Need help?Do you have a question about the Oceanic VEO 4.0 and is the answer not in the manual?
Explains the various icons and displays on the VEO 4.0 dive computer screen.
Details the ADV and SEL control buttons and their basic operations.
Explains various functions achieved by combining button presses.
Covers DTR, No Decompression, O2 Min, and Bar Graphs.
Details Deep Stop, Safety Stop, and Conservative Factor settings.
Covers low battery warnings and audible/visual alarms.
Configuration for Gas Mix, Alarms, Deep Stop, and Safety Stop.
Configuration for algorithms, Bluetooth, and operation modes.
Explains dive initiation and key dive mode displays.
Explains the various icons and displays on the VEO 4.0 dive computer screen.
Details the ADV and SEL control buttons and their basic operations.
Explains various functions achieved by combining button presses.
Covers DTR, No Decompression, O2 Min, and Bar Graphs.
Details Deep Stop, Safety Stop, and Conservative Factor settings.
Covers low battery warnings and audible/visual alarms.
Configuration for Gas Mix, Alarms, Deep Stop, and Safety Stop.
Configuration for algorithms, Bluetooth, and operation modes.
Explains dive initiation and key dive mode displays.
General| Display Type | LCD |
|---|---|
| Operating Modes | Air, Nitrox, Gauge |
| Audible Alarms | Yes |
| Backlight | Yes |
| Battery Type | CR2450 |
| Nitrox Mixes | Up to 3 |
| Battery Life | Approximately 300 dive hours |
| Maximum Operating Depth | 130 meters / 425 feet |
| User Interface | Button-operated |
| Nitrox Compatibility | Yes, up to 50% O2 |
To Next Page
