Need help?Do you have a question about the Oceanic VEO 2.0 and is the answer not in the manual?
Explains the visual layout and icons on the dive computer display.
Provides a general description of the VEO 2.0 dive computer features.
Details the structure and navigation of the dive computer's menus.
Explains how to activate and use the automatic backlight feature.
Describes the audible alarms and the situations that trigger them.
Details connecting the VEO to a PC for data transfer and settings.
Explains the battery type, life, and low battery indicators.
Covers the interface and options for NORM mode on the surface.
Describes how to turn on and initialize the dive computer.
Details the information displayed on the main screen in NORM Surface mode.
Shows dive data from the last dive in NORM mode.
Displays temperature and altitude information in NORM Surface mode.
Shows O2 percentage and PO2 alarm values in NORM mode.
Explains the countdown timers for flying and desaturation.
Introduces the planning sequence for No Deco Dive Times.
Details the pre-dive planning steps and displayed information.
Introduces the dive log function for NORM/GAUG modes.
Shows a summary of recorded dives before detailed data.
Displays pre-dive surface interval and ascent time for a dive.
Shows temperature and altitude data for a dive.
Displays O2 percentage and PO2 values recorded during a dive.
Configures the dive computer to use Air as the gas mix.
Configures the dive computer for Nitrox dives with specific O2 percentage.
Allows setting the Oxygen percentage (FO2) for Nitrox dives.
Sets the default FO2 value for automatic selection.
Configures the audible alarms for various dive conditions.
Sets depth-based alarms for specific dive events.
Configures alarms related to Elapsed Dive Time.
Sets Tissue Loading Bar Graph (TLBG) related alarms.
Configures alarms for Dive Time Remaining (DTR).
Sets alarms for Partial Pressure of Oxygen (PO2) levels.
Controls automatic activation of the dive computer upon immersion.
Selects measurement units (Imperial/Metric).
Enables or disables the Deep Stop feature.
Configures the Safety Stop feature and its parameters.
Selects between DSAT or PZ+ decompression algorithms.
Adjusts conservatism for decompression calculations.
Sets how long the backlight stays illuminated.
Configures the data sampling frequency for logging.
Sets the display format for Month and Day.
Selects between 12-hour or 24-hour time display.
Sets the current time on the dive computer.
Sets the current date on the dive computer.
Selects the primary operating mode (NORM, GAUG, FREE).
Displays total dive time and number of dives recorded.
Shows altitude, temperature, max depth, and longest dive time.
Displays the unit's unique serial number and firmware revision.
Outlines the steps to reset the dive computer to factory settings.
Explains the two bar graphs: nitrogen loading (TLBG) and ascent rate (VARI).
Details the Tissue Loading Bar Graph for No Deco and Deco status.
Describes the Variable Ascent Rate Indicator for normal and gauge modes.
Explains the choice between DSAT or PZ+ decompression algorithms.
Details how the conservative factor affects NDL calculations.
Explains the Deep Stop feature in NORM No Deco dives.
Configures and explains the Safety Stop feature.
Explains how Dive Time Remaining is calculated and displayed.
Defines No Deco Dive Time Remaining based on nitrogen absorption.
Explains Oxygen Tolerance Remaining for Nitrox dives.
Displays core dive information in NORM No Deco mode.
Shows time of day and temperature in NORM No Deco mode.
Displays O2, PO2, and FO2 settings for Nitrox in NORM mode.
Shows preview of Deep Stop depth and time before activation.
Displays details when the Deep Stop feature is active.
Displays details when the Safety Stop feature is active.
Explains when and how Decompression mode activates.
Displays information during a decompression stop.
Explains the conditional violation state and its implications.
Details the first level of delayed violation warnings.
Details the second level of delayed violation warnings.
Details the third level of delayed violation warnings.
Explains the Violation Gauge Mode and its function.
Describes warnings and alarms for high partial pressure of oxygen.
Details the PO2 alarm display and behavior.
Describes warnings and alarms for high oxygen saturation levels.
Shows surface interval and time in Gauge mode.
Displays last dive's data in Gauge mode.
Shows temperature and altitude in Gauge mode.
Displays dive depth, max depth, and dive time in Gauge mode.
Shows surface interval and time for Free Dive mode.
Displays last dive's data in Free Dive mode.
Shows temperature and altitude in Free Dive mode.
Explains the Countdown Timer feature for Free Diving.
Accesses settings for Free Dive specific alarms.
Explains the three settable depth alarms for Free Diving.
Sets the dive operating mode, similar to NORM.
Displays core dive information in Free Dive mode.
Details the specific alarms for Free Dive mode.
Explains alarms related to high nitrogen loading in Free Dive.
Details connecting the VEO to a PC for data transfer and settings.
Provides instructions for cleaning and maintaining the dive computer.
Outlines recommended annual inspections and service procedures.
Explains how to remove the dive computer module from its boot.
Provides step-by-step instructions for replacing the battery.
Instructions on how to reinsert the dive computer module into its boot.
Explains how the dive computer senses and adjusts for altitude.
Lists contact information for Oceanic offices globally.
Table of No Deco Limits for PZ+ algorithm at various altitudes (Imperial).
Table of No Deco Limits for DSAT algorithm at various altitudes (Metric).
Summarizes the dive computer's capabilities and performance metrics.
Explains the visual layout and icons on the dive computer display.
Provides a general description of the VEO 2.0 dive computer features.
Details the structure and navigation of the dive computer's menus.
Explains how to activate and use the automatic backlight feature.
Describes the audible alarms and the situations that trigger them.
Details connecting the VEO to a PC for data transfer and settings.
Explains the battery type, life, and low battery indicators.
Covers the interface and options for NORM mode on the surface.
Describes how to turn on and initialize the dive computer.
Details the information displayed on the main screen in NORM Surface mode.
Shows dive data from the last dive in NORM mode.
Displays temperature and altitude information in NORM Surface mode.
Shows O2 percentage and PO2 alarm values in NORM mode.
Explains the countdown timers for flying and desaturation.
Introduces the planning sequence for No Deco Dive Times.
Details the pre-dive planning steps and displayed information.
Introduces the dive log function for NORM/GAUG modes.
Shows a summary of recorded dives before detailed data.
Displays pre-dive surface interval and ascent time for a dive.
Shows temperature and altitude data for a dive.
Displays O2 percentage and PO2 values recorded during a dive.
Configures the dive computer to use Air as the gas mix.
Configures the dive computer for Nitrox dives with specific O2 percentage.
Allows setting the Oxygen percentage (FO2) for Nitrox dives.
Sets the default FO2 value for automatic selection.
Configures the audible alarms for various dive conditions.
Sets depth-based alarms for specific dive events.
Configures alarms related to Elapsed Dive Time.
Sets Tissue Loading Bar Graph (TLBG) related alarms.
Configures alarms for Dive Time Remaining (DTR).
Sets alarms for Partial Pressure of Oxygen (PO2) levels.
Controls automatic activation of the dive computer upon immersion.
Selects measurement units (Imperial/Metric).
Enables or disables the Deep Stop feature.
Configures the Safety Stop feature and its parameters.
Selects between DSAT or PZ+ decompression algorithms.
Adjusts conservatism for decompression calculations.
Sets how long the backlight stays illuminated.
Configures the data sampling frequency for logging.
Sets the display format for Month and Day.
Selects between 12-hour or 24-hour time display.
Sets the current time on the dive computer.
Sets the current date on the dive computer.
Selects the primary operating mode (NORM, GAUG, FREE).
Displays total dive time and number of dives recorded.
Shows altitude, temperature, max depth, and longest dive time.
Displays the unit's unique serial number and firmware revision.
Outlines the steps to reset the dive computer to factory settings.
Explains the two bar graphs: nitrogen loading (TLBG) and ascent rate (VARI).
Details the Tissue Loading Bar Graph for No Deco and Deco status.
Describes the Variable Ascent Rate Indicator for normal and gauge modes.
Explains the choice between DSAT or PZ+ decompression algorithms.
Details how the conservative factor affects NDL calculations.
Explains the Deep Stop feature in NORM No Deco dives.
Configures and explains the Safety Stop feature.
Explains how Dive Time Remaining is calculated and displayed.
Defines No Deco Dive Time Remaining based on nitrogen absorption.
Explains Oxygen Tolerance Remaining for Nitrox dives.
Displays core dive information in NORM No Deco mode.
Shows time of day and temperature in NORM No Deco mode.
Displays O2, PO2, and FO2 settings for Nitrox in NORM mode.
Shows preview of Deep Stop depth and time before activation.
Displays details when the Deep Stop feature is active.
Displays details when the Safety Stop feature is active.
Explains when and how Decompression mode activates.
Displays information during a decompression stop.
Explains the conditional violation state and its implications.
Details the first level of delayed violation warnings.
Details the second level of delayed violation warnings.
Details the third level of delayed violation warnings.
Explains the Violation Gauge Mode and its function.
Describes warnings and alarms for high partial pressure of oxygen.
Details the PO2 alarm display and behavior.
Describes warnings and alarms for high oxygen saturation levels.
Shows surface interval and time in Gauge mode.
Displays last dive's data in Gauge mode.
Shows temperature and altitude in Gauge mode.
Displays dive depth, max depth, and dive time in Gauge mode.
Shows surface interval and time for Free Dive mode.
Displays last dive's data in Free Dive mode.
Shows temperature and altitude in Free Dive mode.
Explains the Countdown Timer feature for Free Diving.
Accesses settings for Free Dive specific alarms.
Explains the three settable depth alarms for Free Diving.
Sets the dive operating mode, similar to NORM.
Displays core dive information in Free Dive mode.
Details the specific alarms for Free Dive mode.
Explains alarms related to high nitrogen loading in Free Dive.
Details connecting the VEO to a PC for data transfer and settings.
Provides instructions for cleaning and maintaining the dive computer.
Outlines recommended annual inspections and service procedures.
Explains how to remove the dive computer module from its boot.
Provides step-by-step instructions for replacing the battery.
Instructions on how to reinsert the dive computer module into its boot.
Explains how the dive computer senses and adjusts for altitude.
Lists contact information for Oceanic offices globally.
Table of No Deco Limits for PZ+ algorithm at various altitudes (Imperial).
Table of No Deco Limits for DSAT algorithm at various altitudes (Metric).
Summarizes the dive computer's capabilities and performance metrics.
General| Brand | Oceanic |
|---|---|
| Model | VEO 2.0 |
| Category | Diving Instrument |
| Language | English |
To Next Page
