80
Fig. 92 - SET FA LEAD-IN
SET FA (FREE ALARMS) MENU
Sequence >> Lead-in >> EDT >> DA1 >> DA2 >> DA3
Set Points remain as set until changed.
Set FA Lead-in, information includes (Fig. 92):
> Graphics SEt and FA
• A (< 2 sec) to step forward to Set M Lead-in.
• S (< 2 sec) to access Set EDT Alarm.
EDT ALARM
Factory set for a fixed 30 seconds, the EDT (Elapsed Dive Time)
alarm sounds the audible every 30 seconds while underwater in
FREE Dive Mode.
Set EDT Alarm, information includes (Fig. 93):
> Graphics SEt and EDT -
> OFF (or ON) flashing
• A (< 2 sec) to toggle between ON and OFF.
• S (< 2 sec) to save the setting and access Set DA1.
• S (2 sec) to revert to Set FA Lead-in.
Fig. 93 - SET EDT ALARM
To Next Page
