Need help?Do you have a question about the Oceanic VEO 3.0 and is the answer not in the manual?
Protects the operating manual from unauthorized copying or reproduction.
Lists registered and unregistered trademarks and service marks of Oceanic.
Mentions patents issued or applied for to protect design features.
Explains the mathematical model used for nitrogen absorption and decompression theory.
Explains the meaning of various icons displayed on the VEO.
Details the three control buttons (M, S, A) for menu navigation.
Lists the menus available within the Gauge Surf mode.
Describes how to use buttons A, M, and S for menu navigation and backlight.
Describes warning and alarm levels for low battery on the surface.
Details low battery indicators and actions during a dive.
Outlines the order of menu items accessible after activation.
Explains button functions for navigating the NORM Surface Main screen and menu.
Describes the information shown on the second alternate surface screen.
Explains the countdown timers for flying and desaturation.
Details the display and functionality of Fly and Saturation time countdowns.
Shows the initial screen for Plan Mode, displaying NDLs and FO2.
Explains the Pre Dive Planning Sequence display of depths and NDLs.
Shows the initial screen for accessing dive log data.
Details the first data screen for reviewing dive log entries.
Settings for Oxygen percentage in Gas 1 for Nitrox dives.
Settings for Oxygen percentage in Gas 2 for Nitrox dives.
Configures the default FO2 setting for gas calculations.
Accesses settings for Gas 1's Oxygen percentage.
Sets the default FO2 value for gas mix calculations.
Configures the audible alarm settings for the dive computer.
Sets an alarm for a specific depth.
Sets an alarm for Elapsed Dive Time (EDT).
Configures the Dive Time Remaining (DTR) alarm.
Accesses utility settings like Wet Activation, Units, and Algorithms.
Enables or disables automatic activation upon immersion in water.
Selects measurement units (Imperial or Metric).
Enables or disables the Deep Stop feature during dives.
Adjusts the conservatism of dive calculations for safety.
Sets the frequency at which dive data is sampled and stored.
Configures the display format for dates (e.g., M-D or D-M).
Sets the current time on the dive computer.
Selects the dive mode (Norm, Gaug, or Free).
Displays total dive hours and number of dives recorded.
Shows highest altitude and lowest temperature during dives.
Tissue Loading Bar Graph indicating No Deco status or Deco condition.
Modifies NDLs based on altitude for increased safety margin.
Configures the Safety Stop feature for No Deco dives.
Displays the maximum No Deco time remaining at current depth.
Alternate display showing Time of Day and Temperature.
Alternate Nitrox display showing PO2 and FO2.
Preview screen for Deep Stop depth and time.
Nitrox-specific alternate display with PO2 and FO2.
Shows details of an active Deep Stop.
Displays Safety Stop information when activated.
Alternate decompression display showing Time of Day and Temperature.
Nitrox-specific alternate decompression display.
Indicates a second level of delayed dive violation.
Mode that turns VEO into a digital instrument after violations.
How VGM display appears on the surface.
Specific PO2 alarm behavior during decompression.
Oxygen saturation warning behavior during decompression.
Warning when switching gas may cause high PO2.
Alternate display for gauge mode surface data.
Lists menus for gauge mode surface operations.
Second alternate display for gauge mode dive data.
Alternate display for free dive surface data.
Lists menus for free dive surface operations.
Shows the status and settings for the Countdown Timer.
Sets an alarm for Elapsed Dive Time in Free Dive mode.
Configures the first Free Dive depth alarm.
Details settings shared between Norm and Free Dive modes.
Second alternate display for free dive data.
Alarm for when the Countdown Timer reaches zero.
Alarm for Elapsed Dive Time in Free Dive mode.
Configurable depth alarms for Free Dive mode.
Guidelines for annual inspections and service.
Instructions for replacing the device's battery.
Steps to remove the battery from its compartment.
Checking sealing surfaces and components for damage.
Reassembly steps for the battery cover and retaining ring.
Safety warnings specific to Free Dive activities.
No-decompression limits based on altitude in metric units.
No-decompression limits based on altitude in metric units.
Lists the different functions the VEO can perform.
Details the algorithms and standards used by the dive computer.
Specifies accuracy for depth and timers.
Details operational altitude range and compensation.
Details battery type, shelf life, and usage life.
Describes manual and automatic activation methods.
Defines the meaning of TLBG segments for dive status.
Defines ascent rate segments for the VARI indicator.
Specifies the Max Operating Depth limits for different modes.
Protects the operating manual from unauthorized copying or reproduction.
Lists registered and unregistered trademarks and service marks of Oceanic.
Mentions patents issued or applied for to protect design features.
Explains the mathematical model used for nitrogen absorption and decompression theory.
Explains the meaning of various icons displayed on the VEO.
Details the three control buttons (M, S, A) for menu navigation.
Lists the menus available within the Gauge Surf mode.
Describes how to use buttons A, M, and S for menu navigation and backlight.
Describes warning and alarm levels for low battery on the surface.
Details low battery indicators and actions during a dive.
Outlines the order of menu items accessible after activation.
Explains button functions for navigating the NORM Surface Main screen and menu.
Describes the information shown on the second alternate surface screen.
Explains the countdown timers for flying and desaturation.
Details the display and functionality of Fly and Saturation time countdowns.
Shows the initial screen for Plan Mode, displaying NDLs and FO2.
Explains the Pre Dive Planning Sequence display of depths and NDLs.
Shows the initial screen for accessing dive log data.
Details the first data screen for reviewing dive log entries.
Settings for Oxygen percentage in Gas 1 for Nitrox dives.
Settings for Oxygen percentage in Gas 2 for Nitrox dives.
Configures the default FO2 setting for gas calculations.
Accesses settings for Gas 1's Oxygen percentage.
Sets the default FO2 value for gas mix calculations.
Configures the audible alarm settings for the dive computer.
Sets an alarm for a specific depth.
Sets an alarm for Elapsed Dive Time (EDT).
Configures the Dive Time Remaining (DTR) alarm.
Accesses utility settings like Wet Activation, Units, and Algorithms.
Enables or disables automatic activation upon immersion in water.
Selects measurement units (Imperial or Metric).
Enables or disables the Deep Stop feature during dives.
Adjusts the conservatism of dive calculations for safety.
Sets the frequency at which dive data is sampled and stored.
Configures the display format for dates (e.g., M-D or D-M).
Sets the current time on the dive computer.
Selects the dive mode (Norm, Gaug, or Free).
Displays total dive hours and number of dives recorded.
Shows highest altitude and lowest temperature during dives.
Tissue Loading Bar Graph indicating No Deco status or Deco condition.
Modifies NDLs based on altitude for increased safety margin.
Configures the Safety Stop feature for No Deco dives.
Displays the maximum No Deco time remaining at current depth.
Alternate display showing Time of Day and Temperature.
Alternate Nitrox display showing PO2 and FO2.
Preview screen for Deep Stop depth and time.
Nitrox-specific alternate display with PO2 and FO2.
Shows details of an active Deep Stop.
Displays Safety Stop information when activated.
Alternate decompression display showing Time of Day and Temperature.
Nitrox-specific alternate decompression display.
Indicates a second level of delayed dive violation.
Mode that turns VEO into a digital instrument after violations.
How VGM display appears on the surface.
Specific PO2 alarm behavior during decompression.
Oxygen saturation warning behavior during decompression.
Warning when switching gas may cause high PO2.
Alternate display for gauge mode surface data.
Lists menus for gauge mode surface operations.
Second alternate display for gauge mode dive data.
Alternate display for free dive surface data.
Lists menus for free dive surface operations.
Shows the status and settings for the Countdown Timer.
Sets an alarm for Elapsed Dive Time in Free Dive mode.
Configures the first Free Dive depth alarm.
Details settings shared between Norm and Free Dive modes.
Second alternate display for free dive data.
Alarm for when the Countdown Timer reaches zero.
Alarm for Elapsed Dive Time in Free Dive mode.
Configurable depth alarms for Free Dive mode.
Guidelines for annual inspections and service.
Instructions for replacing the device's battery.
Steps to remove the battery from its compartment.
Checking sealing surfaces and components for damage.
Reassembly steps for the battery cover and retaining ring.
Safety warnings specific to Free Dive activities.
No-decompression limits based on altitude in metric units.
No-decompression limits based on altitude in metric units.
Lists the different functions the VEO can perform.
Details the algorithms and standards used by the dive computer.
Specifies accuracy for depth and timers.
Details operational altitude range and compensation.
Details battery type, shelf life, and usage life.
Describes manual and automatic activation methods.
Defines the meaning of TLBG segments for dive status.
Defines ascent rate segments for the VARI indicator.
Specifies the Max Operating Depth limits for different modes.
General| User Replaceable Battery | Yes |
|---|---|
| Audible Alarms | Yes |
| Data Logging | Yes |
| Logbook Capacity | 24 dives |
| Water Activation | Yes |
| Operating Modes | Air, Nitrox, Gauge |
| Nitrox Compatibility | Yes, up to 50% O2 |
| Ascent Rate Indicator | Yes |
| PC Interface | Yes |
| Battery Type | CR2450 lithium battery |
| Algorithm | Pelagic DSAT |
| Backlight | Yes |
| Display Type | LCD |
| Battery Life | Approximately 300 hours |
To Next Page
