Need help?Do you have a question about the Oceanic ATOM 3.0 and is the answer not in the manual?
General| Display Type | LCD |
|---|---|
| Water Resistance | 100 meters |
| Air Integration | Yes |
| Modes | Air, Nitrox, Gauge, Free Dive |
| User Replaceable Battery | Yes |
| Audible Alarms | Yes |
| Dive Log Capacity | 24 dives |
| Altitude Adjustment | Yes |
| Battery Type | CR2450 |
| Backlight | Yes |
| Logbook | Yes |
| Nitrox Compatibility | Yes |
| Type | Wrist Computer |
| PC Interface | Yes |
| Maximum Operating Depth | 100 meters |
| Max Depth | 330 ft (100 m) |
General introduction to the ATOM 3.0 and its key features, including navigation and alarms.
Connecting to PC, software requirements, battery status, and power supply.
Setting time, date, dual time, and using timers and alarms.
Explains surface mode displays and basic functions.
Covers pre-dive planning (PDPS) and post-dive data retrieval.
Setting gas mixes, alarms, and utility preferences.
Details on algorithms, deep stops, safety stops, and calculations.
Handling decompression stops, violations, and ascent rates.
Procedures for changing gas mixes and transmitters.
Covers surface mode displays and settings for GAUG.
Details on dive displays and functions in GAUG mode.
Covers surface mode displays and settings for FREE dive.
Details on depth alarms, NDC time, and dive timers.
Connecting to PC, care, cleaning, and service guidelines.
Step-by-step guide for changing the unit's battery.
Detailed specs, operational parameters, and algorithm data.
A log for recording maintenance and service history.
To Next Page
