Need help?Do you have a question about the Oceanic Dive Computer Pro Plus 2 and is the answer not in the manual?
General| Display Type | LCD |
|---|---|
| Operating Modes | Air, Nitrox, Gauge |
| Audible Alarms | Yes |
| Data Download | Yes, via USB |
| Air Integration | Yes |
| Logbook Capacity | 24 dives |
| Maximum Operating Depth | 100 meters |
| Nitrox Compatibility | Yes, up to 50% |
| Altitude Adjustment | Automatic |
| Safety Stop | Yes |
| Battery Type | User-replaceable 3V CR2450 lithium battery |
| Water Resistance | 100 meters |
Describes the dive computer's control buttons and their functions.
Explains Tissue Loading Bar Graph (TLBG) and its zones.
Details displays for Cylinder Pressure and Depth.
Explains the unit's audible alarms and warning sounds.
Describes how to activate and use the backlight feature.
Details the battery type and its indicators.
Explains settings for Oxygen Percentage (FO2) and its effects.
Details manual and automatic activation procedures.
Describes the unit's state after activation.
Explains how to access and navigate settings.
Covers setting FO2, Max Depth Alarm, Elapsed Dive Time Alarm.
Covers Units of Measure, Hour Format, Time, Date.
Explains how to plan dives using the PDPS.
Details the Tissue Loading Bar Graph for nitrogen absorption.
Explains the O2 Bar Graph for oxygen accumulation.
Describes the visual indicator for ascent speed.
Explains the bar graph for remaining breathing gas time.
How to manage information displayed during a dive.
Details the mode entered when descending past 4 feet.
Explains the mode activated when deco limits are exceeded.
Covers Conditional, Delayed, and Immediate Violations.
Describes warnings and actions for high partial pressure of oxygen.
Explains display of accumulated oxygen limits.
How to operate as a digital depth gauge/timer.
The mode entered upon ascending to 3 feet or shallower.
The initial 10 minutes after surfacing showing dive data.
Access to other modes and PDPS in Surface Mode.
How to view the countdown to flying after a dive.
How to view the desaturation time countdown.
How to view stored dive data.
Indicates wet sensor contacts and troubleshooting.
Instructions for connecting to a PC.
Practice dive scenarios and computer functions.
How to access and configure the simulator.
Simulating descent and time acceleration.
Simulating ascent rates and alternate displays.
How the simulator behaves upon surfacing.
Instructions for maintaining and cleaning the dive computer.
Requirements for annual inspections and warranty.
Procedures for replacing the battery.
Technical details and operational parameters.
To Next Page
