Oceanic Dive Computer Pro Plus 2 - To Set Date (after Setting Time)

32
ATR
O
2
N
2
ATR
O
2
N
2
ATR
O
2
N
2
TO SET - DATE (after setting Time)
Factory set for the factory local Date, the Date can be set to
values between 01/01/01 and 12/31/20.
• After having set and accepted the Time, the Date ap-
pears with the graphic dAY, and Year value flashing
(Fig. 28).
• Press and hold the Right (Select) button to scroll through
the Year values in increments of one Year.
• Press the Left (Advance) button to accept the setting.
• The Month value flashes (Fig. 29).
• Press and release the Right (Select) button to scroll
through the Month values in increments of one month.
• Press the Left (Advance) button to accept the setting.
• The Day value flashes (Fig. 30).
• Press and hold the Right (Select) button to scroll through
the Day values in increments of one day.
• Press the Left (Advance) button to accept the setting.
Fig. 30 - Set Day
Fig. 28 - Set Year
Fig. 29 - Set Month