Oceanic Dive Computer Pro Plus 2 - To Set Hour Format

30
ATR
O
2
N
2
TO SET - HOUR FORMAT (while in the Surface Mode)
Factory set for 12 Hr (12: Am to 11: Pm), the Format can
also be set for 24 Hr (0: to 23: hours).
• Press Both buttons simultaneously, release when SET: 2
appears (4 seconds).
• Press and release the Left (Advance) button, the Units
screen appears with the set point flashing.
• Press the Left (Advance) button 1 more time.
• The graphic Hour appears with 12 (or 24) flashing
(Fig. 25).
• Press and release the Right (Select) button to toggle
between 12 and 24.
• Press the Left (Advance) button to accept the setting and
advance to Set Hour, or press and hold Both buttons for
2 seconds to revert to Surface Mode.
Fig. 25 - Set Hour Format